Table of Contents
Advertisement
ATA Configuration
The field lets you to configure the available ATA controller.Setting
options: Disabled, P-ATA Only, S-ATA Only, P-ATA+S-ATA.
S-ATA Keep Enabled
This item is available for you to enable/disable the onboard S-ATA.
Setting options: Yes, No.
P-ATA Keep Enabled
This item is available for you to enable/disable the onboard P-ATA.
Setting options: Yes, No.
P-ATA Channel Selection
This item is available for you to select the parellel ATA channel.
Setting options: Primary, Secondary, Both.
Combined Mode Option
This item is available for you to select the combined mode of the ATA
controllers. Setting options: P-ATA 1st Channel, S-ATA 1st Channel.
S-ATA Ports Definition
This allows you to set the boot sequence of serial ATA ports.
OnBoard LAN
This item is used to enable/disable the onboard LAN controllers. Setting:
Enabled, Disabled.
AC97 Audio
Auto allows the motherboard's BIOS to detect whether you're using any audio
device. If so, the onboard audio controller will be enabled. If not, the onboard
audio controller will be disabled. If you want to use different controller cards
to connect audio connectors, set the field to Disabled. Setting options:
Disabled, Auto.
BIOS Setup
3-25
Advertisement
Table of Contents
