Table of Contents
Advertisement
Side connections
3
2
1
Multi channel surround receiver
MONITOR
OUT
L
DVI
R
SUB
OUT
CENTER
IN
RGB+HV
STANDARD/
TUNER
HD INPUTS
STANDARD/
HD INPUTS
2
1
Camera, Camcorder or Game system
&
Connect your camera, camcorder or game system as shown.
é
Connect to
VIDEO
For stereo equipment also connect
S-VHS quality with an S-VHS camcorder is obtained by connecting
the S-VHS cables with the
3.
Do not connect cable 1 and 2 at the same time. This may cause
picture distortion !
The side connections allow vertical panning with the cursor up/down. Left
and right panning with the cursor left/right is possible when the input has
been labelled Game in the Setup, Source menu.
Headphone
Insert the plug into the headphone socket L as shown.
&
Press ¬ on the remote control to switch off the internal
é
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm jack.
In the Sound menu select
headphone volume.
&
Connect the audio cables to the Multichannel surround receiver
and to
MONITOR OUT L
é
If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
TV 2.
"
Select
Centre Mode On
The loudspeakers of the TV will now only produce centre
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via
the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Child lock menu (see p. 13).
2 and
3 for mono equipment.
AUDIO L
AUDIO R
input
S-VIDEO
Headphone volume
at the back of your TV 1.
and
R
CENTRE IN
in the Setup, General menu. See p. 9.
3.
1
and
inputs
AUDIO
to adjust the
at the back of your
19
Advertisement
Table of Contents
