Table of Contents
Advertisement
Teletext level 2.5
Some broadcasters offer the opportunity to see
more colours, other background colours and
nicer pictures in the teletext pages.
&
Select
Teletext level 2.5
é
Press the cursor right to select
to take advantage of this feature.
2.5 On
"
Press the cursor right again to select
if you like the more neutral
level 2.5 Off
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Set/Change code
The Child lock feature (see TV, Features, p. 13)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be entered.
The Set/Change code menu item allows you to
create or change a Personal Identification
Number (PIN).
&
Select
Set/Change code
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
instructions on screen.
Important:You have forgotten your code !
&
Select
Change code
press
.
OK
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Centre Mode
To enhance the sound reproduction of your TV
you may connect two extra front loudspeakers
via a Multichannel surround receiver. See
Multichannel surround receiver, p. 19.
If no External Front Speakers are connected, do
not change the predefined factory settings
which is
Centre mode Off
Multichannel surround receiver with Front
Speakers is connected, select
.
On
In this setting, the centre channel in surround
mode is directed to all three internal TV
speakers (left, centre and right).
.
Teletext level
Teletext
.
. Follow the
in the General menu and
. Only if a
Centre mode
Subwoofer
To enhance the sound reproduction of your TV
you can connect an externally powered
subwoofer. See Subwoofer, p. 20.
The volume of the subwoofer is controlled by
the TV. For details, please refer to the
subwoofer's manual.
Lamp rating / Lamp replaced
The TV contains a lamp that eventually will
need to be replaced. One hundred hours
before the lamp reaches the end of its life an
on-screen message will alert you that the lamp
is nearing the end of its expected lifetime so
that you can change it before it wears out.
For instructions on how to replace the lamp,
see Annex Care of the set, Replacing the lamp,
p. 25.
After installing a new lamp in the TV, you need
to enter the lamp rating list and select the
alphabetical code that is provided with the
lamp.This will be a letter from A - Z.The letter
represents the lifetime of the lamp. By inputting
the code, you are telling the TV's Lamp Lifetime
Counter the lifetime of the new lamp.
The next step is to tell the TV that you have
installed a new lamp with the lamp replaced
menu item.This control resets the lifetime
counter for the new lamp and begins keeping
track of the lifetime of the new lamp.
&
Select
Lamp rating
é
Press the cursor right to enter the rating list.
"
Select the letter for your replacement lamp
with the cursor up/down.
'
Select Lamp replaced.
(
Press the
key to confirm that you have
OK
changed the lamp.
Note: A blinking orange indicator on the front of
the TV means that the lamp is not working
anymore and needs to be replaced.
.
9
Advertisement
Table of Contents
