Connect Peripheral Equipment; Connecting And Selecting Equipment - Philips Cineos 55PL9874 User Manual

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note: can handle CVBS and RGB,
EXT 1
can handle Y Pb Pr, 1080i, 576p and 480p;
encrypted transmission of uncompressed digital content and works only with DVI TMDS digital video.
It is preferred to connect peripherals with RGB output to
quality.
If your recorder is provided with the EasyLink function, it should be connected to
EasyLink functionality.
Recorder
(VCR / DVD
L
DVI
R
SUB
OUT
CENTER
IN
RGB+HV
STANDARD/
HD INPUTS
STANDARD/
HD INPUTS
4
Other equipment
CABLE EXT1
EXT2
1
4
2
18
EXT 2
RW)
+
CABLE
1
2
(satellite receiver, decoder, DVD, games, etc.)
&
L
DVI
R
SUB
OUT
CENTER
IN
é
RGB+HV
TUNER
"
STANDARD/
HD INPUTS
STANDARD/
HD INPUTS
3
CVBS, RGB and Y/C,
RGB + HV.
EXT 6 EXT 7
or
EXT 1
Connect the aerial cables 1, 2 and, to obtain the optimum
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only
possible connection is via the aerial cable.You will therefore
need to tune in your recorder's test signal and assign it
programme number 0 or store the test signal under a
programme number between 90 and 99, see Manual installation,
p. 6.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder
handbook. See Decoder, p. 10
You can also connect your decoder directly to
a eurocable.
Connect the aerial cables 1, 2 and 3 as shown (only if
your peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to one of
the euroconnectors
EXT 1
quality.
Look for the test signal of your peripheral in the same way as
you do for a recorder.
Make a selection in the Setup, Source menu, p. 10.
When a recorder is connected to
programme from your TV. Only when a recorder is connected to
it is possible to record a programme from your TV as well as
EXT 2
from other connected equipment.
CVBS and Y/C,
EXT 3
is a DVI connector which allows
as RGB provides a better picture
EXT 2
to benefit from the
EXT 2
, or to obtain a better picture
2 3
you can only record a
EXT 1
and
EXT 4 EXT 5
or with
EXT 1 2