Projecting An Image - Sony VPL-SW620 Operating Instructions Manual

3
Start Projector Station for Network
Presentation.
For Windows:
Select [Start]-[All Programs]-[Projector
Station for Network Presentation] on the
computer.
For Mac:
Double-click [Projector Station for
Network Presentation] in Applications
folder.

Projecting an Image

After starting Projector Station for Network
Presentation, the connection method
selection window appears.
1
Select the connection method.
"
Select Network connection
"
Wireless direct connection
on your use environment.
Network connection: Select this item
when the projector uses LAN or
"WLAN Network
on the Connection/Power menu.
Wireless direct connection: Select this
item when "WLAN Network
"Access Pt. (Auto)
(Manual) on the Connection/Power
"
menu of the projector.
For Windows:
Connection method selection window
"
or
"
depending
is set to "Client
" "
is set to
"
or "Access Pt.
"
Network connection window
Wireless direct connection window
Notes
• The appearance of the application on the
screen is subject to change without notice.
• When a projector is connected to a network
via a wireless connection, if the "SSID" is
changed from the factory default, it may not
be found.
• When a projector is connected to a network
via a wired connection, depending on the
network environment, it may not be found.
2
Set the projector an image will be
projected to
.
a) Network connection
Select or directly input the IP address of
the projector that the computer is
connected to. If the Connection CODE
function is activated, input the four digit
Connection CODE that is displayed on
the right bottom area of the screen (only
on the projectors with the Connection
CODE function).
Since the Connection CODE function is
not available on this projector, there is
no need to enter the code for connection.
Using Presentation Function via Network
59