Displaying Images Or Files Sent From A Tablet Pc/Smartphone - Sony VPL-SW620 Operating Instructions Manual

Items
Change the application
settings.
Disconnect from the
projector.
Select a projection method
then start projecting an
image.
Projection Not projecting an image.
method
Project in full screen.
Project in the left half of
the screen.
Project in the right half of
the screen.
Project in the upper left
quadrant of the screen.
Project in the upper right
quadrant of the screen.
Project in the lower left
quadrant of the screen.
Project in the lower right
quadrant of the screen.
Display the strength of the
wireless signal.
Display the Connection
CODE of the projector
that is connected to the
computer (only on the
CODE projectors with the
Connection CODE
function). The Connection
CODE function is not
available on this projector.
Display the number of
users connected to the
projector.
Display the users' status.
Displaying Images or Files
Sent from a Tablet PC/
Smartphone
You can project JPEG images, PDF files, etc.
stored in a tablet PC/smartphone wirelessly
by using a specific application.
*2
For downloading or detailed method of
using the application, access the following
URL.
Functions
*1
http://PWPresenter.pixelworks.com
*1: To use the application, one of the following
conditions is required.
• Connected to network where wireless
connection can be established (page 10).
• Connected to a wireless network via USB
wireless LAN module IFU-WLM3 (not
supplied) that is connected to the
projector (page 11).
*2: Depending on your Internet connection, a
data communication fee may apply.
Using Presentation Function via Network
61