Electrical Connection - Beko WTV9745XM User Manual

6.7 Electrical connection

• Damaged power cables must be replaced by the Authorised
Service Agents.
DANGER!
• Our company shall not be liable for any damages that
will arise when the product is used without grounding in
NOTE
accordance with the local regulations.
• If the current value of the fuse or breaker in the house is
less than 16 Amps, have a qualified electrician install a 16
Amp fuse.
• Do not make connections via extension cables or multi-
plugs.
EN / 20
a) Loosen the lock nuts on the feet by hand.
b) Adjust the feet until the product stands level and balanced.
c) Tighten all lock nuts again by hand.
a) Connect the product to a grounded outlet protected by a 16 A fuse.
b) Connection must comply with national regulations.
c) The wiring for the electrical outlet circuit must be sufficient to meet
the appliance requirements. Use of a Groud Fault Circuit Interrupter
(GFCI) is recommended.
d) Power cable plug must be within easy reach after installation.
e) The voltage specified in the "(5.) Technical specifications" section
must be equal to your mains voltage.
Washing Machine / User's Manual