Adjusting The Feet - Beko WTV9745XM User Manual

6.6 Adjusting the feet

• Adjust feet so that the product will be balanced on the
location it will be used.
- Balance the machine by adjusting the feet.
CAUTION!
- Check for any play by pressing the product from upper
- Otherwise, the product may move from its place and
• Do not use any tools to loosen the lock nuts. Otherwise, the
lock nuts may get damaged.
Washing Machine / User's Manual
d) To prevent the waste water to go back into the product again and to
ensure easy drainage, do not immerse the end of the hose into the
waste water or do not insert it into the drain for more than 15 cm. If it
is too long, cut it short.
e) The end of the hose should not be bent, it should not be stepped
on and the hose must not be pinched between the drain and the
product.
f) If the length of the hose is too short, use it by adding an original
extension hose. Total length of the hose may not be longer than 3.2
m. Otherwise, the product may fail as it would take water in and out
continuously.
diagonal edges.
cause crushing and vibration problems.
EN / 19