Preset Scan Tuning; Local Seek Tuning - Pioneer DEH-513 Owner's Manual

Using the Best Stations Memory
(BSM)
The radio stations having a strong signal
can be tuned automatically and stored in
memory under buttons 1 to 6 [9]. Press
button [6] for at least 2 seconds. (The "----
will blink.) After "----" stops blinking, the
stations will be stored in memory under
buttons 1 to 6 of [9].
BSM can be canceled mid-operation by
pressing button [6].
The stations will be stored under buttons
1 to 6 in the order of their signal strength.
"
The strongest station will be stored under
button 1, followed by stations with lower
signal strengths.
If there are fewer than 6 stations whose
signal is strong, there will be spare
memory.
It will take almost 30 seconds for BSM to
be completed.
Preset Scan Tuning
8 seconds each. Press button [6]. (The [20]
button again. After the desired station is
tuned, cancel the preset scan tuning. The
station will then continue to be received.
* Stations stored in memory under the
buttons [9] but whose signal is weak will
not be recalled.
Local Seek Tuning
When the local mode is set, the seek
tuning's sensitivity level will become high
and only stations with a strong signal will
be seek tuned. The local mode's seek
sensitivity can be adjusted.
Setting the Local Mode
Press button [5]. (The "LOC.S" [23] will
light.) To cancel the local mode, press the
button again.
Adjusting the Local Seek Sensitivity
There are 4 local seek sensitivity steps for
FM and 2 steps for AM.
LOC-4 is the highest seek tuning
and LOC-1 in descending order enables
the tuning of stations with a respectively
weaker signal.
2. Adjust the sensitivity level by pressing
(4) or (P) of button [2].
.
—
FM Monaural Reception
HSTI