Using The Tuner - Pioneer DEH-513 Owner's Manual

Tone Adjustment
Press button [11] to select tone adjustment
mode. ("BS" appears.) Select the tone you
wish to adjust using the (+4) or (>) side of
button [2]. Each press of the () side
changes the tone from BS ~ TR, while each
press of the (4) side changes the tone from
TR- BS.
Bass Adjustment
Select the Bass mode.
Pressing the (+) side of button [2] increases
bass, while the (-) side decreases bass.
(Display shows "BS -6" ~ "BS 6".)
Treble Adjustment
Select Treble adjustment mode.
Pressing the (+) side of button [2] increases
treble, while the (-) side decreases treble.
(Display shows "TR -6" ~ "TR 6".)
Loudness Adjustment
This "loudness" function enhances both
the high and low ranges of sound to give
even more power to output even at low
volume.
Press button [11] to select loudness
adjustment mode. (The "LOUd" indicator
appears on the display.)
Pressing the (B®) side of button [2] turns the
loudness function on (LOUD [25] light up),
pressing the (4) side turns it off.
Attenuator
* DEH-313 does not have this function.
The volume will be reduced to about 1/10.
Press button [12]. ("V-12" will blink.) To
cancel, press the button again.
Using the Tuner
Parts Identification
[1] Source
{2] Tuning
Seek/Manual
Local Seek Sensitivity
{4] Band
{5] Local mode
[6] BSM/Preset Scan
[8] FM Monaural
[9] Preset
[9] D@ Tuning Step
{20] Preset Number
[21] FM Stereo
[22] FM Monaural
[23] Local mode
[24] Manual
[26] Frequency
{27] Band
HSTI