MikroTik Routerboard NetMetal 5 User Manual

This User Manual covers NetMetal models:
NetMetal 5,
NetMetal 5SHP,
NetMetal 5
NetMetal 5SHP
The NetMetal is a solid and waterproof outdoor device. It has a high power wireless interface, and one
Gigabit Ethernet connector, which supports MDI-X auto-detection. The device has two or three RP-
SMA connectors for connecting external antennas (depends on model). The device is packaged with a
24 V power adapter, a PoE injector, and two mounting loops. There are four models available – two
Three-chain devices (with miniPCIe slot and without), and two Dual-chain models (with miniPCIe slot
and without). Extra places for more RP-SMA connectors are available on the unit in this case.
First use
1. Connect the device to the included PoE injector with Ethernet cable;
2. Connect the PoE injector into the computer;
3. Connect the power adapter to the PoE injector;
4. Download WinBox configuration tool https://mt.lv/winbox;
5. Default IP: 0.0.0.0, user name: admin and there is no password (or, for some models, check user and
wireless passwords on the sticker), use Neighbors tab and connect through MAC address;
6. DHCP Client enabled on the bridge;
7. Once connected configure the device, so it has an active Internet connection https://mt.lv/configuration;
8. Upgrade the RouterOS software to the latest version https://mt.lv/upgrade;
triple,
triple.