Advertisement
Expansion Slots and Ports
Built-in 5GHz 802.11ac/a/n wireless, AP/station/bridge modes supported (for CPE, AP, PtP modes)
One 10/100/1000 Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto
MDI/X), so you can use either straight or crossover cable for connecting to other network devices. The
Ethernet port accepts 8-30 V DC powering from a passive PoE injector.
One USB 2.0 or 3.0 port (depends on model) for extra storage or 3G/4G modem
Buttons and Jumpers
The reset button has three functions:
Hold this button during boot time until the LED light starts flashing, release the button to reset
RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode for managing
the unit from a CAPsMAN server (total 10 seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the
RouterBOARD look for Netinstall servers (total 15 seconds).
Operating System Support
The device supports RouterOS software with the version number at or above what is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the
latest version to ensure the best performance and stability.
To avoid pollution of the environment, please separate the device from household waste and dispose of
it in a safe manner, such as in designated waste disposal sites. Familiarize yourself with the procedures
for the proper transportation of the equipment to the designated disposal sites in your area.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Advertisement
