Panasonic KX-T336 Manual page 80

Changing a night answer
destination to tn UNA
(Universal Night Answer)
1. Lift the handset.
2. -Dial the feature number for
Flexible Night Service 72"
(default) and CO physical number,
* and 1 for external pager 1 or *
and 2 for external pager 2.
1.03 Switching of Day/Night Mode
Description
It is assignable to switch Day/Night mode either
automatically at pre-assigned time or manually
by the Operator 1 (Attendant Console or
Extension) at any time desired.
If Manual Switching mode is assigned, the
Operator 1 must dial the feature
number for
"Night Mode Set" for night service or "Night Mode
Cancel" for day service.
If Auto Switching mode is assigned, the system
will switch the day and night modes at the
programmed time each day.
l
You hear confirmation tone 1 or
2.
3. Replace the handset.
To utilize Auto Switching mode, set "System-
Operation (313)" Night Service to ' Auto' and
assign desired mode switching time to ' Auto
Start Ttme" on a per day of the week basis.
To utilize Manual Switching mode, set ' System-
Operation (3/3)" Night Service to "Manual."
The Operator 1, however, can override the Auto
Mode setting, that is Manual Mode is
established, by dialing the feature number for
"Night Service Manual Mode Set." To restore the
Auto mode, the Operator 1 must dial the feature
number for "Night Service Manual Mode Cancel."
If tenant service is employed, night se&e
assignment unique to each tenant (Tenant 1 and
Tenant 2) can be programmed individually.
In this case, the assignment in ' System-
Operation (3/3)" is applied to Tenant 1 and the
assignment in ' System-Tenant" is applied to
Tenant 2.
Programming
Reference
System Rogramming
VT DlJllIb
' System-Operation (a/3)' ,
9-D-l .03 1 O-G4.00
Night Service
Auto Start Time
' System-Tenant". 9-D-2.00 1 W-5.00
Night Service (Tenant 2)
Auto Start Time
' System-Numbering Plan (&9)", 9-D-6.08 10-C-10.00
Night Mode Set
Night Mode Cancel
Night Service Manual Mode
Set
Night Service Manual Mode
ChllCel
5-G-3
(30393)