Error Message - ABSINA A3800 User Manual

Optimisation.
Increases battery life by stabilising the internal battery
chemistry.
Display.
LED display shows the current charge level (25% | 50% |
75% | 100%).
Safety shutdown.
Integrated safety timer automatically switches off the
charging process of lead batteries after 40 hours (lithium
batteries after 15 hours).
Safety.
Protection against reverse polarity (>1.5V), short circuit,
overvoltage, overcharge, overheating & sparks.
Weatherproof.
Dust and splash-proof, UV-resistant housing.
LED CHARGE STATUS DISPLAY
The charging status of the battery is indicated by 4 different
LEDs:
LED LED status
Flashing
Lights up
Off
Flashing
Lights up
Off
Flashing
Lights up
Off
Flashing
Off

ERROR MESSAGE

Error messages are displayed in
LED
Description
MAINTENANCE AND CARE
Battery < 25%
Always disconnect the power supply from the device before
Battery = 25%
cleaning. Clean the housing with a dry cloth. Check the
Battery = 100%
mains plug/cable, output lead, and pole terminals regularly
for damage. Do not use abrasive cleaners or solvents.
Battery < 50%
Battery = 50%
WARRANTY
The product comes with a 2 year warranty. No warranty will
Battery = 100%
limited garanted for damage resulting from failure to
Battery < 75%
observe the operating instructions.
Battery = 75%
ABSINA is not liable for printing errors.
Battery = 100%
Battery < 100%
Battery = 100% +
Maintenance
Deutsch . English
-LED:
Reason
The battery cannot be charged.
NORMAL
Change the charging mode to
Mode
RECOVER.
RECOVER
The battery cannot be restored.
Mode
Wrong polarity. Check the connection
between battery and charger (red = plus,
black = minus).
The battery voltage is too high or too low for
the selected mode. Check the voltage and
mode. The battery may be deep discharged or
defective.
The battery capacity may be too high for the
selected mode. Check the battery capacity
and charging mode.