Finishing Work; Electrical Connection - Hyundai HYV8T-550E Manual

Switching on/off
Open the protective cap (C).
Press the green button (A) to switch the appliance on.
Press the red button (B) to switch the appliance off.
Press the emergency stop (D) in the event of emergencies.
Note: Prior to each use, check the functioning of the on off switch by switching the device on
and off.
Restart protection in case of power failure (No-voltage release switch)
The equipment will switch of automatically in the event of a power failure, accidental
removal of the plug or if a fuse is triggered. Press the green button on the switch unit to
restart the machine.

Finishing work

• Bring the cleaver blade to the lower position.
• Release one of the control arms.
• Switch the machine off and disconnect the power.
• Tighten the bleed screw.
• Follow the general maintenance instructions.

Electrical connection

Check the electrical connecting cables regularly for any damage. When checking the
connecting cables, make sure that they are not connected to the mains.
Electrical connecting cables must comply with the relevant VDE and DIN regulations. Only
use connecting cables
labelled H 07 RN.
It is mandatory that the type designation be printed on the connecting cable.
Use a portable safety switch (PRCD), if a residual-current- operated protective device (RCD)
ENGLISH
25