My Own Key; Keypad Lock (Keyguard); Access Codes - Nokia RM-409 User Manual

RM-409_FCC_draft_en_1.fm Page 16 Friday, May 2, 2008 10:25 AM

■ My own key

To set the my own key to open applications, select > Settings > Phone sett. >
General > My own key > My own key and an application.
When you briefly press the My own key for the first time, you are asked to select
which application you wish it to launch. Pressing and holding the My own key
launches the Say and Play application. For more information on Say and Play, see
"Search for music by voice," p. 26.
My own key and the rewind key function as N-Gage gaming keys after you have
downloaded and installed N-Gage in your device and N-Gage is active.

■ Keypad lock (keyguard)

To lock the keypad in the standby mode, press the left selection key and * within
1.5 seconds. To set the device to automatically lock the keypad after a certain
time, select > Settings > Phone sett. > General > Security > Phone and SIM
card > Keypad autolock period > User defined and the desired time.
To unlock the keypad, select Unlock, and press * within 1.5 seconds.
When the device or keypad is locked, calls may be possible to the official emergency number
programmed into your device.

■ Access codes

To set how your device uses the access codes, select > Settings > Phone sett. >
Phone and SIM card.
Lock code
The lock code (5 digits) helps to lock your device. The preset code is 12345. Change
the code, and set the device to request the code.
When the device or keypad is locked, calls may be possible to the official emergency number
programmed into your device.
PIN codes
The personal identification number (PIN) code or the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card.
The (U)PIN code is usually supplied with the SIM card. Set the device to request
the code each time the device is switched on.
The PIN2 code may be supplied with the SIM card and is required for some
functions.
16 Y o u r d e v i c e