Table of Contents
Advertisement
Use of Hotplates
Gas Cut Off
This cooker has a safety cut out feature which
switches off the burners when you close the cover.
This device is provided as a safety feature in case
the cover is lowered with the burners on.
Practical Advice on Using the Burners
To use the burners as efficiently as possible, some
basic guidelines should be followed:
•
Use cookware that is the right size for each
burner (see table) in order to prevent the flame from
spreading beyond the bottom of the cookware.
•
Only use cookware with flat bottoms.
•
As soon as the boiling point is reached, turn
the knob to the lowest setting.
•
Always use lids with pots and pans.
Burner
Fast (R)
Semi Fast (S)
Auxiliary (A)
On models equipped with a reduction grid, the
grid should only be used with the auxiliary burner
when cookware with a diameter of less than 12 cm is
used.
1.
To light a specific burner push the
corresponding knob all the way in and turn it
maximum
maximum
counter-clockwise to maximum
maximum
maximum
pressed down until the burner lights.
2.
Turn the control knob anti-clockwise to the
desired setting. Only turn the control knob between
the large flame symbol and the small flame symbol
for adjusting the setting.
3.
To turn off, turn the control knob fully
clockwise to the symbol O O O O O .
ř Cookware diameter (cm)
20 - 24
16 - 20
10 - 14
keeping it
Each burner is fitted with a spark ignitor for lighting
the gas. To ensure rapid lighting of the burners
every time they are used, the ignitors must be kept
clean and dry
clean and dry. Remove any food spillage or
clean and dry
clean and dry
clean and dry
cleaning materials from the electrode using a small
nylon brush such as a tooth brush. Access to the
electrode can be achieved by lifting off the loose
burner parts carefully when the burners are cool.
When the hotplate burner bodies and caps are
removed for cleaning, be careful not to drop any
food particles or cleaning materials into the burner
bases, to avoid the possibility of blocking the gas
jets.
If aluminium based pans are used, a silvery deposit
may appear on the top edge of the pan support
fingers. See 'Care and Cleaning' section for cleaning
information.
After prolonged used of the gas hob there may be
some small amount of discolouration in the area
around the large burners. This is normal and can be
easily removed using propriety stainless steel
cleaning agents.
EN
15
Advertisement
Table of Contents
