Blaupunkt CJ5010 Original Instruction Manual page 8

CJ5010
over the electrical wires.
• Only charge the batteries in chargers specified by the
manufacturer. There is a danger of fire if a charger designed
for specific battery types is not used as intended.
• The battery should only be used in the manufacturer's
equipment. This is the only way to protect the battery from
dangerous overloading.
• Only use the power tool with the correct batteries. The use of
other batteries could cause a risk of personal injury and a fire
hazard.
• The battery can be damaged by sharp objects such as nails or
screwdrivers as well as external forces. The battery may then
short circuit internally and burn out, explode or overheat.
• When not in use, keep the battery away from metal items such
as paper clips, coins, keys, nails, screws or other small metal
objects that could short-circuit the battery terminals. A short
circuit between the battery terminals can cause burns or a
fire.
• Vapours may occur if the battery is damaged or not used as
intended. The battery may catch fire or explode. Provide
access to fresh air or contact your doctor in the event of any
discomfort. Vapours may irritate the respiratory tract.
• Do not open the battery. Short-circuit hazard.
• Wait until the power tool stops moving before putting it
down. The work tool may jam and lead to a loss of control of
the power tool.
• Storing or using the battery in unsuitable conditions can
cause electrolyte leakage. Avoid contact with the
electrolyte, and flush the skin with water in the event of
accidental contact. Additionally, seek medical advice if the
electrolyte comes into contact with the eyes. Electrolyte
leaking from the battery can cause skin irritation or burns.
6