Advertisement
Available languages
Available languages
CJ5010
immediately. A jammed tool can lead to a high-reaction
torque causing a kickback.
• Wear hearing protection while impact drilling .
• Use only clean and sharp cutting tools (such as drill bits).
Using blunted tools reduces work efficiency and increases
the risk of accidents.
• Select the operating mode and the work tool according to
the type of the workpiece.
• Check the condition of the dust cover. In the event of
damage, replace it with a new one or send the device to a
professional service centre.
• Working on some materials generates dust that may pose
health risks, cause allergic reactions or respiratory diseases,
and contribute to developing cancer. Ensure good
ventilation at the work station and use dust masks with an
appropriate protection rating.
• Materials containing asbestos must be handled by properly
trained personnel.
• The machine can only be used in indoors with a functioning
ventilation system.
• Take special care when changing the work tool. It can be very
hot and/or sharp immediately after use. It is recommended
to use protective gloves.
• Use only sharp blades in perfect condition. Condition to
replace: cracked, distorted or blunt.
• Make sure the foot adjustment screws are tightened before
resuming work.
• Choose the right blade for the material, stroke frequency and
pendulum.
• Make sure that the saw blade does not touch other objects
when the tool is switched on.
• Hold the device by the insulated handle as the blade may run
5
Advertisement
