10 RIDING INSTRUCTIONS
–
Always finish the braking before you go into a bend. Shift down to a lower gear appropriate to your speed.
–
Use the braking effect of the engine on long downhill stretches. To do so, shift back one or two gears, but do
not overrev the engine. This means that significantly less braking is required and the brake system does not
overheat.
10.8
172
Info
When the ABS is enabled, maximum braking power can be achieved even with low road grip surfaces
such as sandy, wet, or slippery terrain without locking the wheels.
Warning
Danger of accidents Banked or laterally sloping ground reduces the maximum possible delay.
–
If possible finish braking before going into a bend.
Stopping, parking
Warning
Risk of injury People who act without authorization endanger themselves and others.
–
Do not leave the vehicle unattended if the engine is running.
–
Protect the vehicle against access by unauthorized persons.
–
Lock the steering and remove the ignition key if you leave the vehicle unattended.