Table of Contents
Advertisement
ELECTROMAGNETIC COMPATIBILITY (EMC)
• Guidance and manufacturer's declaration
-
electromagnetic emissions
The
device is intended for use in the electromagnetic environments listed
below,
and should only be used in such
environments:
Emissions test
Compliance
Electromagnetic environment- guidance
RF emissions CISPR 11
Group 1
RF
energy is used only to maintain device's operation.
RF emissions CISPR 11
Class B
Therefore, its
RF
emissions are so low that it's not
likely
to
cause any interference in nearby electronic equipment.
Harmonic emissions
IEC
Not
The device is suitable for use in all
establishments,
including
61000-3-2
Applicable
domestic
establishments,
and
those
directly connected to
Voltage
fluctuations/
flicker
the public
low-voltage
power supply network that supplies
Not
buildings used for domestic
purposes.
emissions IEC 61000-3-3
Applicable
• Guidance and manufacturer's declaration
-
electromagnetic Immunity
The device is intended for use in the electromagnetic environments listed below, and should only be used in such
environments:
Immunity test
IEC 60601 test level
Compliance level
Electromagnetic environment-
guidance
Electrostatic
±
8 kV contact
discharge
± 8 kV contact
In the case
of
air
discharge
discharge (ESD)
± 15 kV air discharge
discharge
testing,
the climatic conditions
IEC 61000-4-2
± 15 kV air discharge
shall be within the following
ranges:
Ambient Temperature:
15 C
0
~35C
0
Relative Humidity:
30%-60%.
Power
frequency
30Nm
30Nm
Power frequency magnetic fields
magnetic field
50 or 60 Hz
50 or 60
Hz
should be at levels characteristic of
IEC
61000-4-8
a typical location in a typical com-
mercial or hospital environment.
• Guidance and manufacturer's declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environments listed below, and should only be
used
in such
environments:
Advertisement
Table of Contents
