IBM 5225 Operator's Manual page 77

5-14 GA34-0054
Not { Buffer
printed number
Printed
{gzlC4CC2~CCCDDDD~D
data 12 5 3
l
4 5
!
6 7 8 9 12 3 4
D
5
ABJC DE
FGHIJKLMrN
Not , { Line feed Carrier return
printed Space character
New line
In the example, one line of data prints as four lines.
The second digit in the first line of data identifies the print buffer used.
To aid counting and identification, the characters are printed in groups of eight. A
vertical bar is printed above the character which starts the next group of eight.
The characters represented by the codes are printed below the codes, on the fourth
line. Formatting commands are not executed, but are printed as data.
During normal printing, when the formatting commands are executed, the buffer
print example would print as:
AB
CDE
N FGHIJKLM
Follow these steps to change the printer from Buffer Print to normal print. Be sure
the forms for the next printing job are loaded.
Step 4
Place the Mode switch in the Online position.
Step 5
D
Press the Stop Reset key.
Stop Reset
Step 6
One Line
Press the Start key
D
(the printer is online
and ready).
Start