IBM 5225 Operator's Manual page 44

7. Place the form's right margin holes over the right tractor pins. Close the trac-
tor cover and tighten the tractor locking knob.
Note:
If
forms are wider than 375 millimeters (14.8 inches), you may have to
read just the left tractor.
8. Loosen the left tractor locking knob
G
and move the left tractor until no
slack remains in the forms between the tractors. Tighten the locking knob.
Note: If you are using muiltipart forms, ensure that the tractor pins fit completely
through all the margin holes.
Loading and Unloading Forms 3-9