Lifting The Generator Set - Kohler 48RCLC Installation Manual

1.2 Lifting the Generator Set

WARNING
The approximate weight of the generator set with enclosure is shown in Figure 3. Use equipment that is rated for the generator
set's weight to lift the unit into place. Lift the enclosure and generator set together as one unit.
Model
48RCLC
60RCLB
Figure 3 Approximate Weights
Insert lifting bars through the four holes in the mounting skid. The placement of the holes maintains balance during lifting.
Lifting holes
Figure 4 Typical Enclosure with Lifting Holes
Follow these general precautions when lifting all generator sets and related equipment.
•
Install proper size rigging at the skid lifting eyes providing a direct pull on the skid lifting eye. Make sure the rigging
does not work as a pry bar lever against the lifting eye.
•
DO NOT lift the generator set using the lifting eyes attached to the engine and/or alternator as these lifting eyes cannot
support the total weight of the generator set.
•
DO NOT attach hoisting equipment to the enclosure. Insert lifting bars through the four holes in the mounting skid.
•
Always protect cables, chains, and straps from sharp edges.
•
Use a spreader bar to prevent lifting cables from contacting the enclosure.
•
Lifting should only be conducted by those trained and experienced in lifting and rigging to achieve a safe and effective
lift. Consideration needs to be given to, but not necessarily limited to the following items:
o
Weight and center of gravity of the equipment being lifted
o
Weight and center of gravity of the lifting device
o
Boom angles
o
Selection of rated rigging
o
Stability of lifting foundation
o
Wind and weather conditions
o
Local or regional codes that may require or restrict types of rigging.
TP-7203 4/23
Unbalanced weight.
Improper lifting can cause severe injury or death and equipment damage.
Do not use lifting eyes. Lift the generator set using lifting bars inserted through the lifting
holes on the skid.
Weight, kg (lb.)
767 (1690)
859 (1894)
Lifting holes
ADV-8494
17