Transportation And Storage - Husqvarna DS150 Operator's Manual

4. Turn the bottom guide wheel counterclockwise with
a flat screwdriver. The bottom guide wheel moves
nearer to the driill column.
5. Tighten the screw that holds the roller shafts.
Note:
After you have tightened the roller shafts,
they must be possible to turn with the feed lever but
not by hand.
• Safely attach the product during transportation to
prevent damage and accidents.
• Use the optional transport wheels for transportation
of the product with a drill motor attached.
• For transportation without transport wheels, it is
necessary to remove the drill motor from the product
because the total weight is more than 25 kg.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
1341 - 005 - 28.09.2023

Transportation and storage

6. Use the feed lever to move the drill motor carriage
up and down. Make sure that the drill motor carriage
moves smoothly on the drill column. The roller shafts
must rotate and not move. If it is necessary, adjust
the roller shafts again.
13