Condenser
Tools Needed
Mat oriels Needed
Screwdriver.
inch blade
Condenser VW Part No 113 905 295C
Sockot 13 mm.
%
inch drive
Extension. 6 inch.
%
inch drive
Handlo (ratchet. T bar. etc.) % inch drive
1. Removing Condenser
a.
Pull
green
wire
connector
off
terminal on coil.
b
Remove distributor cap by releas¬
ing retaining clips and lifting cap
off
c.
Pull both vacuum hoses (black
and green) off distributor
d
Turn engine until rotor is in line
with mark on distributor
Use a
socket wrench and T-bar or turn
fan belt by hand
e
Using a 13 mm socket wrench,
romove nut and washer holding
distributor to crankcase.
f.
Lift distributor out of engine
NOTE
Do not turn engine with the dis¬
tributor removed.
g
Remove screw and washer secur¬
ing condenser wire bracket in dis¬
tributor.
h
Remove screw and washor se¬
curing
condenser
to distributor
body Remove condenser
WIRE TO
50