Qualcast 484345 Instruction Manual page 7

Assemble the upper handle
1. Lift the upper handle, and lock in place using the handle tension knob and tensioning
bolts. Ensure the lower and upper handles are firmly connected.
2. Ensure the rope guide is on the right side, when you stand behind the mower. Engage
the brake lever, and pull the start cord to hang it on the rope guide.
Assemble the grass bag
IMPORTANT!
Make sure the grass collection bag is in place before starting the engine.
1. Attach the grass bag to the frame by fixing all the plastic hooks.
12
2. If using the collection function, raise the safety flap and take out the mulching plug, and
hook the collection bag onto the mower. Ensure the side discharge chute is not fitted
when collecting the grass in the bag.
3. Release the safety flap.
Attach cable clips
Ensure that the cable clips supplied are used to fix the cable to the lower handle.
Do not start the engine before putting 500ml of SAE 30 oil into
the engine.
Failure to do so will result in irreparable damage to the engine
and invalidate your warranty.
STOP!
13