Sennheiser SKM 100 G3 Manual page 19

SKM_100_PRT.book Seite 19 Mittwoch, 4. Februar 2009 4:59 16
Adjusting settings via the operating menu
Activating/deactivating the pilot tone transmission –
"Pilot Tone"
Advanced Menu
P i l o t
Name
Pilot Tone A c t i v e
A c t i v e
Call up Select the desired
"Pilot Tone" setting
"Stored"
The radio microphone adds an inaudible pilot tone to the audio signal. The
receiver detects and evaluates the pilot tone, and is thus able to identify
the signal of the matching transmitter and mute all others. The pilot tone
supports the receiver's squelch function.
Devices of the ew 100 G1 series (generation 1) do not support the pilot
tone function. Therefore, please observe the following when combining a
radio microphone or receiver of the ew 100 G3 series (generation 3) with
devices from an earlier evolution wireless generation:
Radio microphone Receiver
w G3/ w G2 w G3/ w G2
w G3 w G1
w G1 w G3
Adjusting the contrast of the display panel – "LCD Contrast"
You can adjust the contrast of the display panel in 16 steps.
Loading the factory-preset default settings – "Reset"
Advanced Menu
Reset
Reset Yes
Call up "Reset"
Select the desired
setting;
apply the setting
"Stored"
When resetting the radio microphone, only the selected settings for the
pilot tone and for the frequency bank "U" remain unchanged.
Displaying the software revision – "Software Revision"
You can display the current software revision of the radio microphone.
P i l o t
I n a c t i v e
Store the setting
Make sure to ...
... activate the pilot tone func-
tion on both radio microphone
and receiver.
... deactivate the pilot tone
function on the ew 100 G3
radio microphone.
... deactivate the pilot tone
function on the ew 100 G3
receiver.
19