Techart 070.530.510.CCC Assembly Instructions Manual page 4

Risk of injury from hands and arms being crushed, cut or lacerated when
working with sharp-edged and bulky objects.
Wear protective clothing and protective gloves. Keep limbs out of narrow and
inaccessible areas of the vehicle and/or avoid dangerous situations by using
special tools and suitable aids.
Risk of injury to back, muscles, joints, tendons and ligaments from lifting and
carrying heavy and/or bulky objects.
Lift and transport heavy and/or bulky objects with the help of other people
and/or with suitable aids.
Before starting the assembly procedure, carefully read the assembly instructions in full
and pay attention to the safety information and sequence of the individual operation steps.
All body parts must be prepared and painted in accordance with the attached painting
guide.
Handling with the airbag systems only by skilled and trained personnel!
- turn off the ignition and pull the key
- no power supply at the external power source / jump start
- disconnect the battery. Insulate earth strap
- after disconnecting the battery wait for at least 1 minute
- exchange parts which were damaged during dismantling
- when laying down the airbag unit make sure that the bag opening shows
towards the top
- store the airbag unit in a closure in case of a long dismantling time
- the airbag unit must not touch fat, oil, detergents, liquids or similar
substances
- do not expose the airbag unit to more than 90° Celsius
- do not remove the short-circuit spring of the plug contacts
TECHART Version 02, dated June 24, 2013
ASSEMBLY INSTRUCTIONS
TECHART Set of Instrument Dials
Page 4 of 16