Gamry Instruments eQCM 15M Operator's Manual page 23

e. You may need to zoom in to examine the quality of the spectrum. If your spectrum is poor,
disconnect the eQCM 15M from the main block and remount the quartz crystal according to
steps 5 to 8. If your spectrum is good, continue with the assembly.
9. Attach the static cell.
a. Place the O-ring around the side port of the static cell.
b. Carefully slide the static cell into the receptacle of the main block.
c. With two thumbscrews, attach the capture plate to the main block.
Cell Connections
23