Table of Contents
Advertisement
Using a flash too close to a person's eyes may for the short term
affect their eyesight� Take care when taking pictures of infants
and young children�
Simple camera care
■ Handling the camera and battery
• CAUTION - Do not expose to excessive heat such as sunshine, fire
or the like� This can result in an explosion or the leakage of
flammable liquid or gas during use, storage, transportation or
disposal�
• CAUTION - Do not dispose of a battery into fire or a hot oven� Do
not mechanically crush or cut the battery� This can result in an
explosion�
• CAUTION - Do not subject to extremely low air pressure at high
altitude, this may result in an explosion or the leakage of
flammable liquid or gas�
Camera care
• Your camera is a fragile object� Do not expose it to water, sand or
gritty materials�
• Do not use solvent such as thinner or alcohol to remove dirt�
• Do not leave your camera in direct sunlight or hot places such as
the inside of a car� Do not leave the camera in damp places for
prolonged periods�
• Moth repellent gas such as naphthalene may affect your camera
and prints� Take care to keep your camera and prints in a safe,
dry place�
• Note that the temperature range within which your camera can
be used is +41°F to +95°F (+10°C to +35°C)�
• Take great care to ensure that printed materials do not violate
copyright, image rights, privacy or other personal rights and do
not offend public decency� Actions that violate the rights of
others, are contrary to public decency or constitute a nuisance
may be punishable by law or otherwise legally actionable�
■ Charging the Battery
• The battery is not fully charged during manufacture. Please
charge the battery fully before first use.
• Charge the battery using the supplied USB Type-C cable�
Charging times will increase at ambient temperatures below
+41°F (+10°C) or above +104°F (+40°C)�
• When charging outside the temperature range of +41°F to +95°F
(+10°C to +35°C), the charging time may be longer to prevent
deterioration of battery performance� Charge the battery within
the temperature range of +41°F to +95°F (+10°C to +35°C)�
■ Battery Life
• At normal temperatures, the battery can be recharged about
500 times� A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the end of
its service life�
■ Caution: Handling the battery
The battery and camera body may become warm to the touch
after extended use� This is normal�
29
Bluetooth® Devices: Cautions
IMPORTANT: Read the following notices before using the product's
built-in Bluetooth transmitter�
■ Use only as part of a Bluetooth network.
Fujifilm does not accept liability for damages resulting from use in
a manner not authorized or intended� Do not use in applications
requiring a high degree of reliability, for example in medical
devices or other systems that may directly or indirectly impact
human life� When using the device in connection with a computer
and other systems that demand a greater degree of reliability than
Bluetooth networks, be sure to take all necessary precautions to
ensure safety and prevent malfunction�
■ Use only in the country in which the device was purchased.
This device conforms to regulations governing Bluetooth devices
in the country in which it was purchased� Observe all location
regulations when using the device� Fujifilm does not accept
liability for problems arising from use in other jurisdictions�
■ Wireless data (images) may be intercepted by third parties.
The security of data transmitted over wireless networks is not
guaranteed and Fujifilm does not accept liability for interception
of data or images at any time�
■ Do not use the device in locations subject to magnetic fields,
static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in
other locations subject to magnetic fields, static electricity, or
radio interference that may prevent reception of wireless signals�
Mutual interference may occur when the transmitter is used in the
vicinity of other wireless devices operating in the 2�4 GHz band�
■ The Bluetooth transmitter operates in the 2.400GHz –
2.4835GHz. The maximum radio-frequency power is
8.05 mW.
■ This device operates on the same frequency as commercial,
educational, and medical devices and wireless transmitters.
It also operates on the same frequency as licensed transmitters
and special unlicensed low-voltage transmitters used in radio-
frequency identification tracking systems for assembly lines and
in other similar applications�
■ To prevent interference with the above devices, observe the
following precautions.
Confirm that the radio-frequency identification transmitter is not
in operation before using this device� If you notice that this device
causes interference in low-voltage radio-frequency identification
tracing systems, contact a Fujifilm representative�
■ The following may violate, and be punishable, under
applicable law:
– Disassembly or modification of this device�
– Removal of device certification labels�
Advertisement
Table of Contents
