Table of Contents
Advertisement
INSERTING THE DETECTOR
Step 1
Power on the gas detector if required, if it is a
2- or 3-year SST1 then the device will already be
activated. Turn on NFC.
Step 2
Lift the lid on the SST Dock by using the
two-finger guides and the red latch.
Step 3
Insert the device by locating the alligator clip
into the guide in the SST Dock.
Step 4
Close the lid until you hear the click.
Step 5
Select the function on the SST Dock display
that you want to carry out: Bump Test, Calibra-
tion, or Fresh Air calibration. The SST Dock will
then carry out the selected test.
8
Advertisement
Table of Contents
