WatchGas SST Dock Quick Start Manual page 5

MOUNTING THE SST DOCK
The SST Dock can be mounted with the invertible mounting bracket at 2 different angles. Use the
extended screws and plastic spacer included in the box.
Wall mounting
The provided mounting brackets can be used to mount the SST Dock to a wall or table. Mounting
screws and plug are not provided. WatchGas recommends checking the strength of the mounting
area and selecting the proper mounting hardware before mounting the SST Dock. Mounting the SST
Dock should be performed by a qualified installation contractor.
SST Dock on a wall SST Dock on a table Installing the brackets
SWITCH ON THE SST DOCK
If the SST Dock is fully discharged, please allow 5 min of charging prior to switching on the unit.
The LED will show red switching to white prior to start-up.
Connect the SST Dock to an electrical outlet (or surge protector) by means of the included power
adapter. The Status light will then turn on. Use the ON / OFF key (fig 1. part 16 and part 2) to power
on the touch screen.
5