Table of Contents
Advertisement
Checking Correct Film Loading
The film
is
properly loaded and advanced
if
the film rewind
crank rotates counterclockwise when you wind the film ad
-
vance lever_
If the film rewind crank does not rotate, take
out the film, as explained on the following
page,
and reload.
Setting the Film Speed
When loading the film
,
be sure to
set
the film speed scale
at the proper position.
Refer to page 19 for setting the
film speed
.
Repacking a Long-Wound Film
When repacking a long-wound film for darkroom loading into
an ordinary
cartridge,
be sure to trim the tip of the leader
between perforations,
and
make a curl in the winding-up
direction
.
31
Advertisement
Table of Contents
