Table of Contents
Advertisement
the meter switch at
"
OFF" and the shutter speed dial at
"
60".
And set the distance so that the meter needle in
the viewfinder moves
.
Then turn the preset aperture ring
until the aperture needle aligns with the meter needle.
2
When using an ordinary electronic flash unit or flash bulb
unit, connect the cord of the unit to the flash
socket
of
the camera.
The exposure is decided by dividing the guide number of the
unit with the focusing distance and obtaining the proper
f/stop.
• Some tripods make the focusing ring of the FD 55mm
F 1.2
S.S.C.
lens inoperable
.
In this case, attach the camera
on the tripod with C,!non Camera Holder F.
• When using the flash socket by not attaching a flash unit
onto the accessory shoe, be sure to cover it with the ac·
cessory shoe cover.
• The X contact of Canon FTb is 1/60 sec.
• A lens hood should be attached when taking pictures with
a flash
unit.
34
Advertisement
Table of Contents
