Tunturi J550 Owner's Manual page 6

Hide thumbs Also See for J550:

ASSEMBLY

INSTRUCTIONS

...CONTINUED

Double check all

fasteners assembled so

they are sufficiently

tightened and secure.

Loose bolts can result

in personal injury

and/or damage to the

treadmill.

STEP 4_

4A Plug the flat ribbon cable and the small cable into the

connectors on the back of the Computer Display,

4B Carefully slide the Computer DLsplay onto the Display

Base- Careful not to pinch or damage the cables. (See FIG. 6)

Locate the lower circuit board at the right front corner of the

treadmill under the frame. Carefully plug the lower end of the

fiat ribbon cable into the lower circuit board. The flat ribbon

cable exits through the bottom of the Right Handlebar, (See

FIG. 7)

STEP 6

Remove the paper from the double-sided tape on the frame and

press the loose part of the ribbon cable against it. Verify that it

remains in place, (See FIG. 8)

STEP 7_

Attach the Right Side Cover and Front Roller Cap. Careful not

pinch or break the ribbon cable.

(See

FIG. 2,

page 6)

STEP 8__

Plug the socket end of the power cord into the treadmill at the

lower right front corner. Read all warnings on the treadmill

before plugging it into the wall,

(See

FIG, 9)

The treadmill is now ready to use.

TUNTURI J650 OWNER'S MANUAL