How To Connect The Digital In Terminal - Panasonic PT-50LC13 Operating Instructions Manual

Installation
How to connect the DIGITAL IN Terminal
The video signal is digitally input to the projection display for superior picture quality enjoyment.
Connecting a DTV Decoder to DIGITAL IN
DTV Decoder
DIGITAL OUT AUDIO OUT
L R
©©
!, !,,I-
R-AUDIO IN-L _ DIGITAL IN
AUDIO
DV1 cable
t t t
By inputting a High-bandwidth Digital Content Protection high-definition picture source to the DIGITAL IN terminal of
this projection display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is
for use in the future when High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are
put on the market.)
Notes:
• Select the DIGITAL input position by pressing the TVNIDEO button. (E 35)
• The DIGITAL IN terminal can only be used with 1080i, 720p and 480p picture signals. Set the DTV Decoder DIGITAL OUT
terminal to 1080i, 720p, or 480p signal output. Please refer to the DTV Decoder instruction manual.
• If no picture is displayed because the DTV Decoder output cannot be set, use the component Video Input, S-Video Input, or
Video Input. This will display the picture as an analog signal.
DIGITAL IN Terminal Pin Layouts
24 17 9
16 8 1
Connection port view
Pin No. Signal name
1 TM.D.S Data 2-
2 TM.D.S Data 2+
3 TMDS Data 2 Shield
4 NC
5 NC
6 DDC Clock
7 DDC Data
8 NC
9 TM.D.S Data 1-
10 TM.D.S Data 1+
11 TM.D.S Data 1 Shield
12 NC
Pin No. Signal name
13 NC
14 +5V
15 GND
16 Hot Plug Detect
17 TM.D.S Data 0-
18 TM.D.S Data 0+
19 TM.D.S Data 0 Shield
20 NC
21 NC
22 TM.D.S Clock Shield
23 TM.D.S Clock +
24 TM.D.S Clock -
NC: Not connected