How To Connect The Digital In Terminal - Panasonic PT-50LC13 Operating Instructions Manual

Installation

How to connect the DIGITAL IN Terminal

The video signal is digitally input to the projection display for superior picture quality enjoyment.
Connecting a DTV Decoder to DIGITAL IN
DTV Decoder
By inputting a High-bandwidth Digital Content Protection high-defi nition picture source to the DIGITAL IN terminal of
this projection display, high-defi nition pictures can be displayed on the screen in their digital form. (This terminal is
for use in the future when High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are
put on the market.)
Notes:
• Select the DIGITAL input position by pressing the TV/VIDEO button. (P. 35)
• The DIGITAL IN terminal can only be used with 1080i, 720p and 480p picture signals. Set the DTV Decoder DIGITAL OUT
terminal to 1080i, 720p, or 480p signal output. Please refer to the DTV Decoder instruction manual.
• If no picture is displayed because the DTV Decoder output cannot be set, use the component Video Input, S-Video Input, or
Video Input. This will display the picture as an analog signal.
DIGITAL IN Terminal Pin Layouts
24
16 8
Connection port view
20
AUDIO OUT
AUDIO
DVI cable
17 9
1
For assistance, please call : 1-888-VIEW PTV(843-9788)
Pin No. Signal name
1 T.M.D.S Data 2-
2 T.M.D.S Data 2+
3 T.M.D.S Data 2 Shield
4 NC
5 NC
6 DDC Clock
7 DDC Data
8 NC
9 T.M.D.S Data 1-
10 T.M.D.S Data 1+
11 T.M.D.S Data 1 Shield
12 NC
NC: Not connected
Pin No. Signal name
13 NC
14 +5 V
15 GND
16 Hot Plug Detect
17 T.M.D.S Data 0-
18 T.M.D.S Data 0+
19 T.M.D.S Data 0 Shield
20 NC
21 NC
22 T.M.D.S Clock Shield
23 T.M.D.S Clock +
24 T.M.D.S Clock -