ViewSonic M2e User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Projector
  5. M2e
  6. User manual

ViewSonic M2e User Manual

Led smart theater
Hide thumbs
Table of Contents

Advertisement

Quick Links

M2e
LED Smart Theater
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual"
Model No. VS18294
P/N: M2e

Advertisement

Table of Contents
loading

Related Manuals for ViewSonic M2e

Summary of Contents for ViewSonic M2e

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
  • Page 2 As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

  • Page 3: Safety Precautions

    Safety Precautions following Safety Precautions before you start using the projector. Please read the • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Allow at least 20“ (50 cm) clearance around the projector to ensure proper ventilation.
  • Page 4 (UPS). • If smoke, an abnormal noise, or a strange odor is present, immediately switch the projector off and call your dealer or ViewSonic®. It is dangerous to continue using the projector. • Use only attachments/accessories specified by the manufacturer.

  • Page 5: Table Of Contents

    Contents Safety Precautions ............3 Introduction ..............8 Package Contents ..............8 Product Overview ....................9 Projector ........................9 Connection Ports ....................10 Remote Control ..................... 11 Initial Setup ............... 13 Choosing a Location - Projection Orientation ............13 Projection Dimensions ..................14 Mounting the Projector ..................15 Making Connections ..........
  • Page 6 Using the Projector ............ 27 Starting Up the Projector ..................27 First Time Activation .....................27 Auto Focus ......................27 Projection Orientation ..................28 Preferred Language ....................28 Network Settings ....................29 Source Input ......................29 Selecting an Input Source ..................30 Adjusting the Projected Image ................31 Adjusting the Projector's Height and Projection Angle .........
  • Page 7 Regulatory and Service Information ......86 Compliance Information ..................86 FCC Compliance Statement ................... 86 Industry Canada Statement ................... 86 CE Conformity for European Countries ..............88 Declaration of RoHS2 Compliance................. 89 Indian Restriction of Hazardous Substances ............90 Product Disposal at End of Product Life ..............90 Copyright Information ..................91 Customer Service ....................

  • Page 8: Introduction

    Introduction Package Contents M2e Projector DC Power Adapter Power Cord USB Type-C Cable Batteries Quick Start Guide Remote Control Soft Carrying Bag NOTE:  The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more...

  • Page 9: Product Overview

    Product Overview Projector Item Description [1] Lens Projector Lens [2] IR Sensor IR Sensor [3] Auto Focus Camera Automatically adjusts the focus [4] Auto Focus Sensor Automatically adjusts the focus [5] harmon/kardon Speakers harmon/kardon speakers [6] Adjustor Foot Stepless adjustment foot...

  • Page 10: Connection Ports

    Connection Ports Port Description [1] Power Button Power On/Off [2] LED Indicator LED Indicator [3] Audio Out (3.5 mm jack) 3.5 mm jack audio output socket [4] HDMI¹ HDMI port2 [5] USB-C³ USB-C port [6] IR Sensor IR Sensor [7] MICRO SD Micro SD socket (SDXC up to 64 GB - FAT32/NTFS) [8] USB A (5V/2A Out) USB 2.0 Type A port (USB Reader - FAT32/NTFS)

  • Page 11: Remote Control

    Remote Control Button Description [1] Power Turns the projector On or Off Displays the input source selection [2] Source bar. Automatically focus the image. To manually adjust, press and hold [3] Focus the Focus button on the remote control for three (3) seconds [4] Bluetooth Launch Bluetooth search.
  • Page 12 Remote Control - Effective Range To ensure proper function of the remote control follow the steps below: Approx. 30° 1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s). 2. The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.) NOTE: ...

  • Page 13: Initial Setup

    Initial Setup This section provides detailed instructions for the initial set up of your projector. Choosing a Location - Projection Orientation Personal preference and room layout will decide the installation location. Consider the following: • Size and position of your screen. •...

  • Page 14: Projection Dimensions

    Projection Dimensions • 16:9 Image on a 16:9 Screen NOTE:  (e) = Screen / (f) = Center of Lens 16:9 Image on a 16:9 Screen (b) Projection (c) Image (a) Screen Size Image Width Distance Height 76.2 31.64 0.80 14.71 37.36 26.15 101.6...

  • Page 15: Mounting The Projector

    NOTE:  If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.

  • Page 16: Making Connections

    Making Connections This section guides you on how to connect the projector with other equipment. Connecting to Power DC Power (Power Outlet) 1. Connect the power cord to the power adapter. 2. Connect the power adapter to the DC IN jack at the rear of the projector. 3.

  • Page 17: Usb-C Power Bank

    USB-C Power Bank 1. Connect one end of the USB Type-C cable to the USB-C port of the projector. 2. Connect the other end of the USB Type-C cable to the power bank. NOTE:  The power bank should be 45W (15V/3A) at least, and support Power Delivery (PD) protocol output.

  • Page 18: Connecting To External Devices

    Connecting to External Devices HDMI Connection Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI port (it supports HDCP 1.4/HDMI 1.4) of your projector. NOTE: ...

  • Page 19: Usb Connection

    NOTE:  • Ensure your USB Type-C device can support video transmission. • The M2e can also use a USB-C connected power bank to turn on the system. However, the brightness level will be limited to 50% and 30% when the Light Source Level is set as Full or Eco respectively.

  • Page 20: Wireless Screen Mirroring

    3. “ViewSonic PJ-XXXX” will now be visible, select it. NOTE:  Some Android devices support direct “Casting”. If your device does, go to the Casting feature and choose “ViewSonic PJ-XXX” from the list of available devices. You can also scan the FAQ QR code and follow the...

  • Page 21: Connecting To Audio

    Connecting to Audio Bluetooth Speaker The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback. To connect and pair your device: 1. Go to: Home > Bluetooth. 2. Use the Left and Right directional buttons on the remote control to select Bluetooth Speaker or Bluetooth Pairing.
  • Page 22 NOTE:  • Once paired, if both the projector and your device are powered on they will automatically connect via Bluetooth. • The projector’s name will be labeled as “M2e”. • Only the Power and Return buttons can exit Bluetooth mode.

  • Page 23: Bluetooth Out

    Bluetooth Out Connect the projector to external headphones or speakers that support Bluetooth. To connect and pair your device: 1. Go to: Home > Bluetooth. 2. Use the Left and Right directional buttons on the remote control to select the Bluetooth Out option.

  • Page 24: Connecting To Networks

    Connecting to Networks Wi-Fi Connection To connect to a Wi-Fi network: 1. Go to: Home > Setting > Network Settings > Wi-Fi 2. Press Left or Right on the remote control to select Enable. 3. Available Wi-Fi networks will then be displayed. Select one of the available Wi-Fi networks.
  • Page 25 4. If you connect to a secure Wi-Fi network, you must enter the password when prompted.

  • Page 26: Custom Ssid

    Custom SSID 1. Go to: Home > Setting > Network Settings > Wi-Fi 2. Press Left or Right on the remote control to select Enable. 3. From the available Wi-Fi networks list select Others and press OK on the remote control.

  • Page 27: Using The Projector

    Using the Projector Starting Up the Projector 1. Ensure the projector’s power cord is properly connected to a power outlet. 2. After plugging in the DC Power Adapter, the projector will turn on automatically. NOTE:  The Status LED will be green during startup. First Time Activation If the projector is activated for the first time, you will need to select your Projection Orientation, Preferred Language, Network Settings, and Source Input.

  • Page 28: Projection Orientation

    Projection Orientation Select the preferred projection orientation and press OK to confirm the selection. For more information, see page 13. Preferred Language Select the desired language and press OK to confirm the selection.

  • Page 29: Network Settings

    Network Settings Select one of the available options. For more information, see page 24. Source Input Quickly access the Source Input menu by pressing the Down button on the remote control when at the Home Screen. Additionally, you can press the Source button on the remote control.

  • Page 30: Selecting An Input Source

    Selecting an Input Source The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. The projector will automatically search for input sources. If multiple sources are connected, press the Source button on the remote control to select the desired input, or press the Down button when at the Home Screen until the source list is displayed.

  • Page 31: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Projector's Height and Projection Angle The projector is equipped with one (1) adjuster foot. Adjusting the foot will change the projector’s height and the vertical projection angle. Carefully adjust the foot to fine tune the projected image’s position. NOTE: ...

  • Page 32: Shutting Down The Projector

    Shutting Down the Projector 1. Press the Power button on the projector or remote control and the following message will appear: 2. Press the Up/Down buttons on the remote control to select Turn Off and press OK on the remote control. 3.

  • Page 33: Input Source Selected - On-Screen Display (Osd) Tree

    Input Source Selected - On-Screen Display (OSD) Tree After your input source is selected, you can adjust the Image Setting and Advanced menus. Main Menu Sub-menu Menu Option Image Setting Color Mode Brightest Movie Gaming User 1 User 2 Brightness (-/+, 0~100) Contrast (-/+, 0~100)
  • Page 34 Main Menu Sub-menu Menu Option Image Setting Color Management Primary Color Green Blue Cyan Magenta Yellow (-/+, 0~100) Saturation (-/+, 0~30) Gain (-/+, 0~60) Reset Current Color Reset Settings Cancel Advanced Aspect Ratio Auto 16:9 16:10 Zoom 0.8x~1.0x Light Source Level Full Range Auto...
  • Page 35 Main Menu Sub-menu Menu Option Advanced 3D Settings 3D Sync Auto Disable Frame Sequential Frame Packing Top-Bottom Side-by-Side Disable 3D Sync Invert Invert harman/kardon Movie Audio Mode Music User 100Hz 500Hz 1500Hz 5000Hz 10000Hz Audio Volume (0~50) Mute Disable Enable Information Source Resolution...
  • Page 36 Image Setting Menu After your input source is selected, you can adjust the Image Setting menu. To access the Image Setting menu: 1. Press Setting on the remote control. 2. Use the Up/Down buttons to select a menu.
  • Page 37 3. Then use the Left/Right buttons to enter the sub-menu(s) and/or adjust the settings. 4. Press the Return button to go to the previous menu or exit.
  • Page 38 Menu Option Description Color Mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal. Brightest Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, i.e.
  • Page 39 Menu Option Description Color Temp Select the color temperature setting. • 6500K: Maintains normal white coloring. • 7500K: A higher, cooler color temperature than 6500K. • 9300K: The highest color temperature; makes the image appear the most bluish-white. • User Color: Adjust red, green, and blue values as desired.
  • Page 40 Menu Option Description Color Only in permanent installations with controlled lighting Management levels such as: boardrooms, lecture halls, or home theaters should Color Management be considered. Yellow Green White Magenta Cyan Blue Color Management provides fine color control adjustment to allow for more accurate color reproduction, should you require it.
  • Page 41 Advanced Setting Menu After your input source is selected, you can adjust the Advanced menu. To access the Advanced menu: 1. Press Setting on the remote control. 2. Press the Right button to access the Advanced menu.
  • Page 42 3. Use the Up/Down buttons to select a menu. 4. Then use the Left/Right buttons to enter the sub-menu(s) and/or adjust the settings. 5. Press the Return button to go to the previous menu or exit.
  • Page 43 Menu Option Description The Aspect Ratio is the ratio of the image width to the Aspect Ratio image height. With the advent of digital signal processing, digital display devices, like this projector, can dynamically stretch and scale the image output to a different aspect than that of the image input signal.
  • Page 44 Menu Option Description HDMI Settings Range Select a suitable color range according to the color range setting of the connected output device. • Full: Sets the color range from 0~255. • Limited: Sets the color range from 15~235. • Auto: Sets the projector to detect the range of the input signal automatically.

  • Page 45: Operating The Projector

    Operating the Projector This section will introduce the Home Screen and its menus. Home Screen The Home Screen is displayed every time you start the projector. To navigate the Home Screen, simply use the directional buttons on the remote control. You can return to the main Home Screen at any time by pressing the Home button on the remote control, regardless of what page you are on.

  • Page 46: Home Screen - On-Screen Display (Osd) Menu Tree

    Home Screen - On-Screen Display (OSD) Menu Tree Main Menu Sub-menu Menu Option File Management Apps Center Bluetooth Setting Network Settings Wi-Fi Enable/Disable SSID Configure IP IP Address Subnet Mask Default Gateway DNS Server Basic Settings Language English French German Italian Spanish Russian...
  • Page 47 Main Menu Sub-menu Menu Option Setting Basic Settings Front Table Front Ceiling Projector Projection Rear Table Rear Ceiling Disable Auto Keystone Enable V Keystone (-/+, -40~40) Keystone H Keystone (-/+, -40~40) 4 Corner Disable Adjustment Enable Zoom 0.8x~1.0x Manual Focus Focus Disable Auto Focus...
  • Page 48 Main Menu Sub-menu Menu Option Setting Advanced Disable Settings Power On Source HDMI USB-C Power On/Off Disable Ring Tone Enable Disable Auto Power On Enable Disable 10 minutes Auto Power Off 20 minutes 30 minutes Disable 30 minutes 1 hour Smart Energy 2 hours Sleep Timer...
  • Page 49 Main Menu Sub-menu Menu Option Setting Advanced High Altitude Disable Settings Mode Enable Reset Reset Settings Cancel Reset to Factory Reset Default Cancel Information Light Source Hours System Version Memory XX GB of XX GB Information Used Wi-Fi Mac Address Serial Number Screen Mirroring...

  • Page 50: Menu Operations

    Menu Operations File Management Easily manage files and folders. 1. Select: Home > File Management. 2. Select a device on the source list: USB, Local Storage, MicroSD, etc. Use the direction buttons to select the desired file. Then press OK on the remote control to open the selected file.
  • Page 51 How to Edit a File 1. While in File Management, press and hold the OK button for three (3) seconds. 2. A check box will appear at the front of each file. Use the direction buttons and press OK to select one or more files. 3.
  • Page 52 How to Use Control Bar Buttons The Control Bar buttons will appear on screen if a video, music, or photo file are selected to be opened. Picture Video Music Back Back Back Play Rewind Play Next Play Pause Zoom in Pause Next Zoom out...
  • Page 53 Supported File Formats Supported Office formats: Item Indicators Able to open and read documents in doc/ doc/docx Document docx viewing xls/xlsx Able to open and read documents in xls/xlsx function ppt/pptx Able to open and read documents in ppt/pptx Able to open and read documents in pdf English, Simplified Chinese, Chinese (TW), Chinese (HK), Spanish (LA), French (EU), PT (EU), PT (BR), German, Russian, Italian,...
  • Page 54 Supported External Connected Device formats: NTFS Format FAT32 Format exFAT Supported Size Device (Max. Size) Read Write Read Write Read Write USB Memory 256 GB Stick USB HDD 2 TB Micro SD 256 GB NOTE:  • Windows 10 built-in format tool only supports FAT32 format up to 32 GB. •...

  • Page 55: Apps Center

    Apps Center View, launch, and uninstall Apps. 1. To view your Apps, select: Home > Apps Center. 2. Use the direction buttons to select the desired App. Then press OK on the remote control to launch the App. NOTE:  Press the Home button on the remote control to return to the Home Screen at anytime.
  • Page 56 To Uninstall Apps 1. Open the Apps Center by selecting: Home > Apps Center. 2. Use the directional buttons to select the desired App. 3. Press and hold OK on the remote control for three (3) seconds. The below dialogue box will appear: 4.

  • Page 57: Bluetooth

    Bluetooth The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback. For more information, see page 21.

  • Page 58: Setting

    Setting Under Setting you can adjust Network, Basic, and Advanced Settings, Date & Time, Firmware Update, and view Information. Network Settings 1. Select: Home > Setting > Network Settings.
  • Page 59 2. View and adjust your Wi-Fi and network settings. 3. To setup a Wireless connection, see “Connecting to Networks” on page 24.
  • Page 60 Basic Settings 1. Select: Home > Setting > Basic Settings. 2. Use the Up and Down buttons to select the desired option and press OK, or use the Left and Right buttons to make adjustments or selections.
  • Page 61 3. To return to a previous menu press the Return button. Menu Description Language Select your desired language. Projector Position Select the preferred projection position.
  • Page 62 Menu Description Keystone Adjust trapezoidal screen image distortion. Auto Keystone Provides a rectangular screen image by automatically adjusting the keystone number when there is a trapezoidal screen image caused by the tilting of the projector. • Enable: Automatically adjust the keystone number. •...
  • Page 63 Menu Description Focus Adjust the focus of the screen image. Manual Focus Adjust the focus with the Left and Right buttons on the remote control. Auto Focus Choose from the following: • Enable: Automatically adjust the focus instantly without the remote control. •...
  • Page 64 Date & Time Adjust Date, Time, Time Zone, and Time Format. NOTE:  The time is displayed in the top-right corner after connecting to the Internet. 1. Select: Home > Setting > Date & Time. 2. Use the Up and Down buttons to select the desired option and press OK, or use the Left and Right buttons to make adjustments or selections.
  • Page 65 Menu Description Automatic Date & Time Users can synchronize the date and time automatically after connecting to the Internet. Enable Turn on synchronization. Disable Turn off synchronization. Time Zone Select your desired location. Time Format Select a different display time format. 12 Hours 12-hour clock.
  • Page 66 Firmware Upgrade Users can update the firmware Online, or by USB, and check the version number. NOTE:  Do not unplug the power cord, USB, or disconnect from the Internet during the upgrading process. 1. Before entering the Firmware Upgrade menu, ensure the projector is connected to the Internet.
  • Page 67 2. Select Enter by pressing OK on the remote control. 3. The system will check the ViewSonic website (OTA) and display the below dialog message if there is new Firmware. 4. By selecting Yes, a progress bar will appear as the update process begins.
  • Page 68 Firmware Update by USB 1. Download the latest version from the ViewSonic website and copy the file to a USB device. 2. Plug the USB into the projector, then go to: Home > Setting > Firmware Upgrade > Software Update By USB.
  • Page 69 Advanced Settings 1. Select: Home > Setting > Advanced Settings. 2. Use the Up and Down buttons to select the desired option and press OK, or use the Left and Right buttons to make adjustments or selections.
  • Page 70 3. To return to a previous menu press the Return button. Menu Description Power On Source Allows the user to enter the desired source directly after turning on the projector. Power On/Off Ring Tone Enable or disable the power on/off ring tone. Auto Power On This projector supports the CEC (Consumer Electronics Control) function for synchronized...
  • Page 71 Menu Description Smart Energy Auto Power Off The projector can turn off automatically after a set period of time once no input source is detected. Sleep Timer Turn off automatically after a set period of time. Power Saving Lower power consumption if no input source is detected after five (5) minutes.
  • Page 72 Select the suitable power consumption of the LED. Full 100% NOTE:  If using a USB-C connected power bank to charge the M2e, the light source level will only have Full (50%) and Eco (30%) options. High Altitude Mode It is recommended that you use High Altitude...
  • Page 73 Menu Description Reset Settings Reset the Settings to default. NOTE:  Language, High Altitude Mode, Projector Position, Network Settings, All installed Apps in the Apps Center, Add App, Bluetooth, Zoom, H/V Keystone, 4 Corner Adjustment, and Light Source Hours will remain unchanged. Reset to Factory Default Factory reset.
  • Page 74 Information 1. Select: Home > Setting > Information. 2. View system status and information. NOTE:  Press the Home button on the remote control to return to the Home Screen at anytime.

  • Page 75: Screen Mirroring

    Screen Mirroring Mirror your personal device’s screen. To setup wireless Screen Mirroring, see “Wireless Screen Mirroring” on page 20. NOTE:  Ensure your device is connected to the same network as the projector.
  • Page 76 Adding Apps Add your favorite Apps to the Home Screen. 1. From the Home Screen, select Add App and then press OK on the remote control. 2. Use the directional buttons to select the desired App and press OK.
  • Page 77 3. Now your favorite App will appear on the Home Screen. Delete Apps From the Home Screen 1. From the Home Screen, select the App you want to delete and press and hold OK for three (3) seconds. 2. The message, “Do you want to Delete this application from My Favorites?” will appear.

  • Page 78: Appendix

    184 x 184 x 54 mm (W x H x D) (7.2” x 7.2” x 2.1”) Weight Physical 1.0 kg (2.20 lbs) Power 90W (Typical) Consumption < 0.5W (Standby) ¹ Please use the power adapter from ViewSonic® or an authorized source only.

  • Page 79: Projector Dimensions

    Projector Dimensions 184 mm (W) x 184 mm (H) x 54 mm(D) Timing Chart HDMI Video Timing Horizontal Dot Clock Vertical Timing Resolution Frequency Frequency Frequency (Hz) (KHz) (MHz) 480i 720(1440) x 480 15.73 59.94 480p 720 x 480 31.47 59.94 576i 720(1440) x 576...

  • Page 80: Hdmi Pc

    HDMI PC Horizontal Dot Clock Resolution Refresh Rate (Hz) Frequency (KHz) Frequency (MHz) 59.94 31.469 25.175 72.809 37.861 31.5 640 x 480 37.5 31.5 85.008 43.269 720 x 400 70.087 31.469 28.3221 60.317 37.879 72.188 48.077 800 x 600 46.875 49.5 85.061 53.674...
  • Page 81 Horizontal Dot Clock Resolution Refresh Rate (Hz) Frequency (KHz) Frequency (MHz) 640 x 480 @ 67Hz 66.667 30.24 832 x 624 @ 75Hz 74.546 49.722 57.28 1024 x 768 @ 75Hz 75.02 60.241 1152 x 870 @ 75Hz 75.06 68.68...

  • Page 82: Usb C Timing

    USB C Timing Horizontal Dot Clock Resolution Refresh Rate (Hz) Frequency (KHz) Frequency (MHz) 480i 59.94 15.73 480p 59.94 31.47 576i 15.63 576p 31.25 720/50p 37.5 74.25 720/60p 74.25 1080/50i 28.13 74.25 1080/60i 33.75 74.25 1080/24p 74.25 1080/50p 56.25 148.5 1080/60p 67.5 148.5...

  • Page 83: Troubleshooting

    Troubleshooting This section describes some common problems that you may experience when using the projector. Problem or Issue Possible Solutions The projector does not • Ensure the power cord is properly attached to the turn on projector and to the power outlet. •...

  • Page 84: Led Indicators

    LED Indicators Light Status and Description Power Stand-by mode (5 sec.) (< 0.5W) Green Power On...

  • Page 85: Maintenance

    • ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

  • Page 86: Regulatory And Service Information

    Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 87 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Page 88: Ce Conformity For European Countries

    CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Ecodesign Directive 2009/125/EC and Radio Equipment Directive 2014/53/EU. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE).

  • Page 89: Declaration Of Rohs2 Compliance

    Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum...

  • Page 90: Indian Restriction Of Hazardous Substances

    Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic®...

  • Page 91: Copyright Information

    ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein;...

  • Page 92: Customer Service

    For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn www.viewsonic.com/hk/ 香港 (繁體中文) Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/...

  • Page 93: Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
  • Page 94 (e) the serial number of the product. 3. Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. 4. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
  • Page 95 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

  • Page 96: Mexico Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &...
  • Page 97 Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based...
  • Page 98 Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.
  • Page 99 C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Process Color Pantone Black C Spot Color Pantone 187 C Spot Color...

This manual is also suitable for:

Vs18294

Table of Contents