Sensair Automatic Electric Storage Fan Heaters - Creda Heating Solution Brochure

Creda heating solution brochure
Table of Contents

Advertisement

SFHA Sensair Automatic
Electric storage fan heaters
"
The ultimate combination
of storage and direct
fan heating. Able to
regulate input with direct
acting heat flexibility, the
SFHA Sensair is more
effective at retaining heat
than a conventional
storage heater.
Able to operate on virtually any tariff
and with superior high performance
insulation levels, it achieves higher SAP
and NHER ratings than manual input
storage heaters.
Product Selector
Model
Reference
SFH18AW
70305
SFH24AW
70315
22
Key features
• Combines electric storage fan heating,
direct acting heating and fanned heat output
with simple controls
• Fully automatic heat storage - no user adjustment
required on input controls
• High performance insulation works more
effectively than a conventional storage heater
• Heat output is via a quiet two speed fan
"
• Boost setting for high speed room heat up
• Fan can be switched off without altering
thermostat setting
• Operates on virtually any tariff and takes better
advantage of extended or split tariffs
• Fanned heating avoids heat stratification
• Lockable controls cover
• Negative pressure air movement through the
storage core avoids hotspots and heat leakage
Rating
Direct
Charge
Storage
Acting
Acceptance (7 hrs)
2.5kW
1.5kW
17.6kWh
3.4kW
1.5kW
23.5kWh
+44 (0) 1733 456789
Electric storage
heating
Net Storage
Weight
Number
of Elements
14.9kWh
121kg
3
20kWh
158kg
4
www.creda-heating.co.uk
Technical Specification
• Elements (storage) - mineral insulated stainless
steel sheathed
• Insulation - opacified silicaceous aerogel and
mineral fibre mat
• Storage Core - high density iron oxide compound
• Fan Unit - two speed crossflow fan
• Controls (Output) - regulated by fan, activated
by integral adjustable thermostat
• Controls (Input) - hydraulic head temperature
compensated, room and storage core temperature
sensitive, auto-set charge control
• Protection - two level thermal safety overheat
• Supply - 230/240V AC single phase
Dimensions
Model
Height A
Width B
SFH18AW
705mm
788mm
SFH24AW
705mm
1016mm
Number of
Remaining Useful Heat* (Fan Off)
Core Bricks
After 17hrs (Static) Discharge
12
40%
16
40%
Depth C
187mm
187mm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents