Page 1
Contact Details Please note that some of the contact details on this PDF document may not be current. Please use the following details if you need to contact us: Telephone: 0844 879 3588 Email: customer.services@gdcgroup.co.uk The Help Centre section of this website also features a wide range of information which may be of use to you and is available 24 hours a day. It includes: • Operating and installation instructions downloads • Request a repair • Where to buy our products • Literature downloads • Heating requirement calculator www.credaheating.co.uk/help‐centre A division of GDC Group Ltd Registered No: 1313016 England VAT GB 287 1315 50004 Millbrook House Grange Drive Hedge End Southampton SO30 2DF EEE Producer Registration Number –...
Wall Mounting Thermostat Operation IMPORTANT – The wall brackets supplied with the appliance The heater is fitted with an adjustable thermostat enabling must be used. The heater should be positioned observing the room temperature to be controlled by adjusting the setting the minimum clearances stated around the heater - see accordingly.
Automatic Operation Safety - Overheat protection Set the timer switch to position. The panel will now operate For your safety this appliance is fitted with a thermal cut-out. during set ‘ON’ periods under the control of the thermostat. In the event that the product overheats for some reason, the cut-out prevents excessive temperatures on the product by To set the timer’s ‘ON’...
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC CREDA HEATING TEL: 0845 604 2399 MILLBROOK HOUSE...