Sunquartz Shortwave Infra-Red Radiant Heaters - Creda Heating Solution Brochure

Sunquartz
Shortwave infra-red radiant heaters
"
Instant heat right where
it's needed. Sunquartz
short wave infra-red
heaters warm people,
"
not the air.
Their uses are endless, from warehouses
to churches. These efficient sun-like
heaters can penetrate damp air with
minimum heat loss to the atmosphere.
Key features
• Up to 90% efficient at converting electricity
into energy
• Instant sensation of heat with visible glow at
switch on
• Absolutely silent in operation
• Long range heat projection
• Modular design
• Lightweight and silent
• Fitted with wire guard for safety
• 1 and 2 lamp units are suitable for a 230-240V
single phase supply
• 3 lamp units are supplied wired for single phase
supply but can be connected to a 380-415 volt
3 phase supply
Product Selector
Model
CSQ1.5
CSQ2.0
CSQ3.0
CSQ4.0
CSQ4.5
CSQ6.0
CSQAD
36
Control options
PIR automatic controller senses movement
detected within its range and automatically
switch on the heater which will remain
switched on for a preset time.
The unit is suitable for 500W-6,000W
single phase operation. Soft start circuitry
is incorporated to reduce the inrush
current, allowing cables and fusegear to
be rated as for resistive loads and
extending lamp life.
The PIR range is adjustable and a
temperature hold-off facility will inhibit
operation when ambient temperatures
exceed a value selected between 10°C
and 20°C.
Sunquartz autodriver
Ref: 85 822084
Reference Rating
75 771801 1.5kW
75 771802 2kW
75 771803 3kW
75 771804 4kW
75 771806 4.5kW
75 771807 6kW
85 822084 Sunquartz autodriver PIR
+44 (0) 1733 456789
Commercial
space heating
Number of lamps Height A
1 185mm
1 185mm
2 370mm
2 370mm
3 555mm
3 555mm
www.creda-heating.co.uk
Technical Specification
• Tungsten halogen lamps, 230/240V with ruby red
quartz outer sleeve
• Reflectors bright rolled, specular 99.8%
aluminium, electro-chemically brightened
• Electro zinc coated steel casing
• High pressure die cast aluminium end castings
• Epoxy polyester powder paint finish white/grey
• Supply - 230/240V AC single phase (3 lamp units
can be connected to a 380/415V 3 phase supply)
Dimensions
Width B
390mm
390mm
390mm
390mm
390mm
390mm
Depth C
115mm
115mm
115mm
115mm
115mm
115mm