Remove The 2242 Solid-State Drive (For Selected Models) - Lenovo IdeaPad 1 Series Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
replacement part:
Memory

Remove the 2242 solid-state drive (for selected models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board. Then, remove tow screw and the 2242
solid-state drive bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 11. Disconnect cables and remove screws and 2242 solid-state drive bracket
Screw specifications
M2 x L2.5
Step 2. Remove the 2242 solid-state drive by pulling it away from the slot.
to look up the Lenovo part numbers of the following
Number of screws
2
.
Chapter 4 Removing a FRU or CRU
33