Lexmark ST9817 User Manual page 31

Understanding the printer menus
Menu item
Reports
Menu Settings Page
Event Log
Event Log Summary
HealthCheck Statistics
Supply Usage And Counters
Clear Supply Usage History
Reset Black Cartridge Counter
Reset Black Imaging Unit Counter
Reset Maintenance Counter
Printer Emulations
PPDS Emulation
Off*
On
Print Configuration
Font Sharpening
0–150 (24*)
Print Configuration
Print Density
Disabled*
1–5 (3*)
Device Operations
Quiet Mode
Off*
On
Device Operations
Panel Menus
Enable*
Disable
Device Operations
Safe Mode
Off*
On
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Print reports about printer menu settings, printer events, and
event logs.
Reset the supply usage history or the supply page counters
after replacing the toner cartridge and imaging unit.
Set the printer to recognize and use the PPDS data stream.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Adjust the toner density when printing documents.
Set the amount of noise that the printer produces.
Note: Enabling this setting slows the printer performance.
Enable access to the control panel menus.
Note: This menu item appears only in the Embedded Web
Server.
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
30