Table of Contents
Advertisement
PROMATRIX 9000
–
–
–
Refer to
–
2.8
Release 1.30
Not published, release for internal purposes only.
2.9
Release 1.20
The following PROMATRIX 9000 products can be installed and configured:
PM9-SCL
PM9-AD604 Amplifier, 600 W 4‑channel
PM9-AD608 Amplifier, 600 W 8‑channel
PM9-EOL
PM9-MPS3
PM9-CSLD
PM9-CSLW
PM9-CSE
PRA-ES8P2S Ethernet switch, 8xPoE, 2xSFP
PRA-SFPSX
PRA-SFPLX
Dynacord
Zones and zone groups can now be configured to the call station's Push‑To‑Talk button to
make live announcements without connecting to a call station extension. It simplifies the
handling of basic calls that are always going to the same zone or zone group. Zone
selection from a Call station extension can be done in parallel.
Traditional Chinese is available and added to the language selection for the Graphic user
interface of the PM9-CSLx.
Functionality is added in preparation for certification to the North American standard for
mass notification systems:
–
English (UL2572) is available for language selection. This language selection is used
for mass notification systems and will set Configuration software and Graphic user
interface of the PM9-CSLx to a specific English, that complies to UL terminology.
–
For each device a check box is added to General setting, which is set to Emergency
relevant on default. Troubles (faults) that occur on devices that have assigned
Emergency relevant will reported as Mass notification system faults.
–
Class Mass notification is a new option in General settings of PM9-CSLx. Class Mass
notification let the Call station act as a First responder panel for Mass Notification
Systems (MNS). Emergency group is a new set of functionality, that allows multiple
first responders (fire fighters) to control the evacuation of a building from multiple
locations in which each has, one or more, First responder panel(s) (FRP's) in use.
–
Transfer of control is a new function, that is only available when Class: Mass
notification and Emergency group are set. In order to avoid confusion among the first
responders (fire fighters), actions are only possible on one First responder panel at
the time. That First responder panel is then 'in control'. It is possible to force the 'in
control' state and to grant or deny a request.
Release 1.20, page 9
System controller, large
End‑of‑line device
Multifunction power supply, large
Desktop LCD call station
Wallmount LCD call station
Call station extension
Fiber transceiver, multimode
Fiber transceiver, single mode
Release notes
Supported products | en
2022-12 | V1.70 |
9
Advertisement
Table of Contents
