Table of Contents
Advertisement
6
en | Supported products
1.4
Installation and configuration
Detailed installation and configuration instructions are provided in the installation manual and
configuration manual of PROMATRIX 9000. Both manuals can be downloaded from
www.dynacord.com
When a PROMATRIX 9000 system is installed for voice alarm purposes, take notice of the
installation and configuration directions in the checklist for compliance to the EN 54‑16 and
EN 54‑4 standards. The checklist can be found at the end of the installation manual.
2
Supported products
2.1
Release 1.70
Same list of supported products as Release 1.20, page 9 , Release 1.40, page 8 and
Release 1.50, page 7 .
Added functionality:
–
–
2.2
Release 1.61
Same list of supported products as Release 1.20, page 9 , Release 1.40, page 8 and
Release 1.50, page 7 .
Added functionality:
–
–
–
2.3
Release 1.60
Not published, release for internal purposes only.
2022-12 | V1.70 |
in the PROMATRIX 9000 product section.
Implementation of a SIP/VoIP interface for telephone paging with live speech. A SIP
extension number can be linked to a PROMATRIX 9000 call macro. It is possible to
configure call priority, start and end chimes, and the destination of the call. Besides
telephone paging, the SIP/VoIP function can be used as another interface for audio and
control to PROMATRIX 9000 from 3
passenger information systems.
Implementation of a lock function to protect a call station placed in public against
unauthorized access. To gain access to the call station, the operator must enter a User
number and a Pin code in the LCD. The call station will automatically lock out after the
lock timer expires or when the user presses the logout button.
Support of static IP address allocation is now available in addition to DHCP and Link
Local address allocation. The Network configurator facilitates the assignment of IP
addresses to either DHCP or static IP mode. It is a separate PC-based software tool and
is available for download from www.dynacord.com.
It is possible to assign up to 10 standby controllers to one duty controller. All system
controllers must be in the same subnet. This feature is especially convenient for a large
setup with multiple system controllers. If a connection between system controllers fails,
they continue to operate as separate self-sufficient systems, within their locally
connected audio zones and call stations.
The bug where a keypad extension mismatch of a Call station was not always reported
correctly was fixed.
rd
party systems such as intercom, nurse call, and
Release notes
PROMATRIX 9000
Dynacord
Advertisement
Table of Contents
