Release 1.41 - Dynacord PROMATRIX 9000 Release Notes

8 en | Supported products
–
–
–
2.6

Release 1.41

Same list of supported products as Release 1.20, page 9 but now the PRA-CSBK is part of
the set that can be installed and configured.
Added functionality:
–
–
–
–
2.7 Release 1.40
Same list of supported products as Release 1.20, page 9 , but now the PRA-ANS is part of
the set that can be installed and configured.
Added functionality:
–
–
–
2022-12 | V1.70 |
In accordance with the North American standard for Mass Notification Systems, the
software language set of English (UL 2572) has been revised and expanded in UL 2572
terminology.
The Call station indicator test has been extended to the LCD display, in cadence with the
microphone LED ring, the display will show the identical colors.
A bug fix has been implemented to resolve the issue that in some cases a System
controller watchdog reset occurred while making a call on a Zone where volume was
controlled by an Ambient Noise Sensor.
A bug fix has been implemented to resolve the issue that under certain conditions an
"Amplifier channel fault" with "Severity: High" got the status "resolved" when on the
same amplifier channel a fault occurred with "Severity: low" priority.
For compliance to the Chinese GB16806 standard the translation of "EOL fault" into
Simplified Chinese language was changed to a translation in standard-compliant
terminology.
A bug fix has been implemented to solve an issue that appeared when Background music
was muted. When automatic volume control was configured in combination with BGM
there was a possibility that when BGM was muted, amplifiers started to disconnect/
connect to the system.
A bug was fixed that in rare cases a high priority call stopped all running calls that were
playing a message in the start chime phase.
Support for the new PRA-ANS Ambient noise sensor. The unit monitors changing ambient
noise levels for automatic adjustment of announcement or background music levels (AVC
- Automatic Volume Control). This insures the public address audio is set at a
configurable level above the ambient noise in order to guarantee intelligibility of
announcements, yet at a comfortable level. Upon failure or disconnection of the device,
the announcement volume of the subscribing amplifier channels is automatically set to its
maximum within the applicable control range.
Support for the PRA-CSBK Call station kit, basic, which will be available by November
2021. The Call station kit, basic is an open frame call station to create dedicated, fully
customized control panels with a CAN bus interface.
Make announcement with zone selection is now available as an additional function for
extension buttons. This function can be assigned to buttons and is similar to the Make
announcement function, but without the pre-configured zone / zone groups selection.
Using the Make announcement with zone selection function, a pre-recorded message,
based on a call definition, can be started aborted/stopped in one or more manual
selected zones / zone groups.
Release notes
PROMATRIX 9000
Dynacord