Release 1.40; Notices; Documentation And Software Download; Software Update - Dynacord PROMATRIX 9000 Release Notes

Public address and voice alarm system
Table of Contents

Advertisement

PROMATRIX 9000
PM9-CSE
PRA-ES8P2S Ethernet switch, 8xPoE, 2xSFP
PRA-SFPSX
PRA-SFPLX
3.2

Release 1.40

Same compliances as Release 1.20, page 10 .
Now also added to EN54‑16 and to ISO 7240‑169:
PRA-ANS Ambient noise sensor.
3.3
Release 1.41
Same compliances as Release 1.20, page 10
No new changes and/or additions.
Refer to
3.4
Release 1.42
Same compliances as Release 1.20, page 10 .
No new changes and/or additions.
3.5
Release 1.50
Same compliances as Release 1.20, page 10 .
For release 1.50, the PROMATRIX 9000 system has also been certified for EN54‑16 and
ISO 7240‑169.
Notice!
i
In combination with the PROMATRIX 9000 system, the OMN-ARNIE, the OMN-ARNIS and the
Cisco IE-5000-12S12P-10G switch are not certified with DNV-GL Type Approval.
3.6
Release 1.61
Same compliances as Release 1.20, page 10 and Release 1.50, page 11 .
3.7
Release 1.70
Same compliances as Release 1.20, page 10 and Release 1.50, page 11 .
4

Notices

System characteristics that are normal and intended, but possibly not expected.
4.1

Documentation and software download

PROMATRIX 9000 product documentation and software is available from
> PROMATRIX 9000 product section.
4.2

Software update

If an updated configuration was created with a newer software version, it should not be used
on an older software version.
Always store and keep backups of the current configuration before upgrading.
Dynacord
Call station extension
Fiber transceiver, multimode
Fiber transceiver, single mode
Release 1.20, page 10
Release notes
Notices | en
11
www.dynacord.com
2022-12 | V1.70 |

Advertisement

Table of Contents
loading

Table of Contents