Table of Contents
Advertisement
1 General Information
This general manual provide important electrical and mechanical installation information. For correctly
installation and obtain stable power output, please read and understand this manual carefully before installing and
maintaining the PV modules. And keep this manual properly for future reference during PV module maintenance or
sales.
This manual does not constitute a warranty, expressed or implied. Hyundai Energy Solution does not assume
responsibility and expressly disclaims liability for loss, damage, or expense arising out of or in any way connected with
installation, operation, use or maintenance of modules.
PV module should be installed in accordance with all safety precautions in this manual and local laws and
regulations, and should be installed and maintained by qualified professionals who have professional skills and
knowledge and are familiar with the mechanical and electrical requirements of the system. The installer must inform
the customer.
Any questions, please contact with the salesman or customer service personnel of Hyundai Energy Solution for
further explanations.
Installation Manual Disclaimer
Hyundai Energy Solution reserves the right to change this user manual without prior notice.
This user manual is not a warranty, nor does it have any meaning of warranty.
This manual will be updated from time to time, please contact the commercial department of Hyundai Energy
Solution to obtain relevant products and documents.
Limitation of liability
Hyundai Energy Solution shall not be responsible for any kind of injury, including but not limited to physical injury
or property damage caused by module operation, system installation error or failure to follow instructions in this
manual.
2 General Principles Of Security
Modules rated for use in this application class may be used in systems operating at greater than 50V DC or 240W,
where general contact access is anticipated. Modules qualified for safety through IEC 61730-1 and this part of IEC
61730 within this application class are considered to meet the requirements for safety class II.
No matter whether the PV module is connected to the system or not, proper protective measures should be
used when touching the PV module, such as insulation tools, safety caps, insulation gloves, safety belts, and safety
insulation shoes. During installing, grounding, connecting cables, and cleaning modules, the proper electrical
protection tools must be used too.
Advertisement
Table of Contents
