Toshiba REGZA ANALOGUE Series Manual page 19

NATIVE
PC NORMAL
PC WIDE
Dot by Dot
Press QUICK and highlight Picture Size, then press Q to display the list of available widescreen formats.
B b to highlight the required format and Q to select.
Use and
• When a format is not available, it will be grayed out.
AV format
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public
display or commercial gain may infringe on copyright laws.
This setting will show the picture
without over scan, i.e. WYSIWYG.
This option is only available in the
HDMI input mode.
This setting will show the picture
without over scan, i.e. WYSIWYG.
This option is only available when
watching PC signal source via HDMI
or PC terminal.
This setting will show the picture
without over scan and side panel.
This option is only available when
watching PC signal source via HDMI
or PC terminal.
"Dot by Dot" is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (i.e. VGA input source).
PC format
19
CONTROLS AND FEATURES